HEADER PIPE / SNAP CLAMPS

• Lightweight PVC plastic in 20’ ( 6 Meters) sections with seven airtight outlets
• Available in 4, 6, 8 and 10" sizes (102mm, 152mm, 204mm & 254mm)
• Leakproof rubber sleeves and lever activated "Snap-Tight clamp
• Steel elbows, tees, caps and angle fittings for each size
• Easy to install and maintain

• Designed for rapid water jetting installation
• Durable PVC plastic screen with galvanized steel inner tube
• Aluminum head with saw teeth to penetrate tough ground strata and hard pan
• Ball valve maximizes water flow during installation, seals when pumping begins

• Designed to remove self jetting wellpoints
• Easy release from welltop for rapid use

• One or two bolt steel fittings
• Leak tight under normal pump pressure
• Available in 4, 6, 8 and 10" sizes (102mm, 152mm, 204mm & 254mm)

• Lightweight PVC plastic, standard 2.5" (62.5 mm) size
• Custom lengths from 10-23 feet (3-7 meters)
• Slotted screens and inner tube for maximizing drawdown
• Self-cleaning by reverse flushing
• Durable, designed for jet rod, punch
or casing installation

• Snap in pressure fitting
• Connects self jetting wellpoint to water pressure source
• Spring bracket slips under wellpoint top to provide leak-tight connections

HEADER SUPPORT

• Durable Steel Brackets
• Designed to keep header pipes level

• Reinforced flexible hose
• Double seal compression fittings for airtight vacuum or pressure
• Built-in shut off valve
• Installs by hand!

• Designed for wellpoint installation in tough ground strata and hardpan
• Installed by "Lift and Drop" action using high pressure jetting water
• Once installed, the wellpoint and sand column for proper water flow are inserted

• Adaptable for PVC plastic and steel wellpoint systems
• Custom water jetting and discharge systems